cradle relay accessories the best rela y tion 108-98016 rev. b ec-jm00-0009-03 ecoc: jm10 1. aug. 04
size i cradle relay accessories and mounting sockets with hand solder terminals sockets with pcb terminals size ii size iii size iii size ii size i approx. weight 3.5 g approx. weight 4.5 g approx. weight 5.5 g approx. weight 6.5 g approx. weight 5.5 g approx. weight 4.5 g european directive conformance: cradle accessories product conformance according to: - directive 2000/53/ec: elv (end of life of vehicles) - directive 2002/95/ec: rohs (restrictions of the use of certain hazardous substances in electrical and electronic equipment) compliance is evidenced by written declaration from all raw material suppliers. tyco electronics axicom only has responsibility for the proper processing of these materials. confirmation is valid for date codes 0501 page 2 (9) 108-98016 rev. b
dimension drawing (in mm) sockets with hand solder terminals with hold-down spring for cradle relay w cradle relay accessories and mounting sockets with pcb terminals with hold-down spring for cradle relays n, s and p size i 26.6 size ii 32.5 size iii 38 socket dimension a page 3 (9) 108-98016 rev. b
cusn8 fb 390 plated with min. 3 m m silver or min. 1 m m gold phenolformaldehyde - type 31 (din 7708, part 2) makrolon (polycarbonate) 5 a cradle relay accessories and mounting general data terminal material socket material with solder terminals socket material with pcb terminals maximum continous current at 70 c version sockets for printed circuit mounting, terminals silver-plated with earth terminal for solder terminals, hand solder terminals, silver-plated hold-down springs for cradle relays n, s and p for cradle relay w size i ii iii i ii ii i ii iii i ii ordering code ordering code v23154-z1001 v23154-z1002 v23154-z1028 v23154-z1005 v23154-z1006 v23154-z1015 v23154-z1021 v23154-z1022 v23154-z1034 v23154-z1023 v23154-z1024 tyco part number 0-1393824-1 9-1393809-1 1-1393824-0 0-1393824-4 0-1393824-5 0-1393824-8 0-1393827-1 0-1393827-2 0-1393760-2 0-1393827-3 0-1393760-1 gold plated terminals on request page 4 (9) 108-98016 rev. b
cradle relay accessories and mounting minimum spacings between sockets dimension drawing (in mm) with hold-down spring for cradle relays n, s and p when mounting cradle relay p consideration should be given to magnetic fields. strong dc magnetic fields, possibly caused by adjacent relays, and large iron masses are the most common causes of interference. experience has shown that under normal operating conditions the minimum spacings specified for cradle relay p are sufficient to prevent cross interference. relays oriented inversely to each other for cradle relay p relays oriented in the same direction dimension b 27 33 39 dimension c 42 48 54 socket size i size ii size iii dimension c 27 33 39 socket size i size ii size iii page 5 (9) 108-98016 rev. b
cradle relay accessories and mounting mounting hole layout for cradle relays and sockets with hand solder terminals dimension drawing (in mm) with hold-down spring for cradle relays n, s and p size iii size ii size i *) this hole is omitted when the mounting hole layout is intended for the socket. fixing of the socket direct mounting of relays without socket requires a fixing nut m2.5 din 934-m6au. ordering code: d00934-a0025-s001 am 2.5 x ... din 84 (screw length = dimension a + 3.5 mmm 2.7 din 433 bm 2.5 din 439 earth spring page 6 (9) 108-98016 rev. b
cradle relay accessories and mounting mounting hole layot for sockets with pcb terminals basic grid 2.5 mm according to en 60097 dimension drawing (in mm) fixing of the socket am 1.6 x ... din 84 (screw length = dimension a + 7.5 mm 1.7 din 433 bm 1.6 din 439 size i size ii size ii view onto the terminals m = earth terminal a) hole for mechanical armature actuation, if required b) hole for the socket mounting with screw m1.6 page 7 (9) 108-98016 rev. b
im relays 4 th generation slim line C low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 1.5... 24 v, coil power consumption of 140... 200 mw, latching relays with 1 coil 100 mw. the im relay is available as through hole and surface mount type (j-legs and gull wings) and capable to switch loads up to 60 w/62,5 va. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the im relay is cecc/iecq approved and certified in accordance with iec/en 60950 and ul1950. dimensions approx. 10 x 6 mm board space and 5.65 mm height. p2 relays 3 rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 140 mw, latching relays with 1 coil 70 mw. the p2 relay is available as through hole or surface mount type and capable to switch currents up to 5 a. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 15 x 7,5 mm board space and 10 mm height. fx relays 3 rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw. the fx2 relay is available as through hole type and capable to switch loads up to 60 w/62,5 va. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the fx2 is cecc/ iecq approved and certified in accordance with iec/en 60950 and ul1950. dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. ft2 / fu2 relays 3 rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. nominal voltage range from 3 ... 48 v, coil power consumption 200 ... 300 mw. most sensitive 48 v relay. available as through hole and surface mount type. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the ft2/fu2 is cecc/iecq approved and certified in accordance with iec/en 60950 and ul1950. dimensions approx. 15 x 7,5 mm board space and 10 mm height. fp2 relays 3 rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw.. the fp2 relay is available as through hole type and capable to switch loads up to 30 w/62,5 va. dielectric strength fulfills fcc part 68 (1,5 kv C 10 / 160 s). the fp2 is cecc/iecq approved. dimensions approx. 14 x 9 mm board space and 5 mm height. mt2 / mt4 2 nd generation non polarized, non latching 2 c/o and 4 c/o telecom and signal relay with bifurcated contacts. nominal voltage range from 4.5 ... 48 v, coil power consumption 150/200/300/400 and 550 mw, and 300 mw (mt4). dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s) for both and the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) the mt4 only. dimensions mt2 approx. 20 x 10 mm board space and 11 mm height, mt4 approx. 20 x15 mm board space and 11 mm height. d2n relays 2 nd generation non polarized 2 c/o relay for telecom and various other applications. nominal voltage range from 3 ... 48 v, coil power consumption from 150 .... 500 mw. the d2n relay is capable to switch currents up to 3 a. dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 20 x10 mm board space and 11,5 mm height. p1 relays extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 65 mw, latching relays with 1 coil 30 mw. the p1 relay is available as through hole or surface mount type and capable to switch currents up to 1 a. dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 13 x 7,6 mm board space and 7 mm height for tht or 8 mm height for smt version. w11 relays low cost, non polarized 1 c/o relay for various applications. nominal voltage range from 3 ... 24 v, coil power consumption 450 mw, sensitive versions 200 mw. the w11 relay is capable to switch currents up to 3 a. dielectric strength 1000 vrms. dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. reed relays high sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. nominal voltage range from 5 ... 24 v, coil power consumption 50...280 mw for 1 n/o and 125 ... 280 mw for 2 n/o or 1 c/o versions. reedrelays are available in dip or sil housing and capable to switch currents up to 0,5 a. integrated diode and/or electrostatic shield optional. dielectric strength 1500 vdc. dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for dip or 19,8 x 5 mm board space and 7,8 mm height for sil version. cradle relays extremely reliable and mature relay family of 1 st generation for various signal switching applications. available as non polarized, polarized / latching and relay with ac coil. the benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 vdc to 220 vac. cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 a. forcibly guided (linked) contact sets optional. dielectric strength 500 vrms. dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. other relays we offer a variety of different relay families for maintenance and replacement purposes. these relays are up to 60 years old now, such as card relay sn (v23030 / v23031 series), small general purpose relay (v23006 series), small polarized relay (v23063 ... v23067 and v23163 ... v23167 series). accessories like sockets, hold down springs, etc. optional. hf3 relay high performance low cost rf relay with excellent rf characteristics. available with an impedance of 50 and 75 ohm. suitable for frequen - cies up to 3 ghz. actually smallest rf relay available combining small size, excellent rf performance and smd solderability. available as non latching or latching relay with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 v, coil power consumption 140 mw, latching relays with 1 coil 70 mw. dimensions 14.6 x 7.3 x 10 mm. cradle relay accessories and mounting page 8 (9) 108-98016 rev. b
tyco electronics axicom ltd. seestrasse 295 - p.o. box 220 ch-8804 au-w?denswil / switzerland phone +41 1 782 9111 fax +41 1 782 9080 e-mail: axicom@tycoelectronics.com tyco electronics corporation pob 3608, harrisburg, pa 17105, usa phone +1 800-522-6752 tyco electronics ec trutnov s.r.o. komenskho 821 cz-541 01 trutnov / czech republic e-mail: axicom@tycoelectronics.com tyco electronics paulsternstrasse 26 d-13629 berlin / germany phone +49 30 386 38573 fax +49 30 386 38575 e-mail: axicom@tycoelectronics.com page 9 (9) 108-98016 rev. b
|
